Power Steering Pump Pulley

[nadams]

When replacing the power steering pump on my 2000 Focus SPI i tried pulling the pulley off the old pump, but it cracked. I tried ordering one from Ford after trying NAPA and online, but they discontinued the pulley. I just need the pulley but the junkyards by me wont work with me. Anyone have any tips on where i could get just the pulley?

[flyboyike]

http://www.car-stuff.com/store/?N=42...=Ford&md=Focus

[nadams]

Thanks, but i have the SOHC vin "p" not the zetec.

[flyboyike]

Originally Posted by nadams

Thanks, but i have the SOHC vin "p" not the zetec.

I'm aware of that. Is the mounting different? I ask, because, if it's not, at $13 it's probably worth a try, even if you have to use a different belt.

[zetecDon]

Moved to "General Technical Chat". Do you have a U-Pull & Pay or something similar nearby? I would suggest going to one of those places, pull off the part you need and then pay as you leave. Those are about the only places I know that will allow you to pick the part that you actually need without having to take the entire unit. Most junkyards require you to take the entire part instead of just the piece you need so they aren't left with parts that no one wants because it's not a whole unit.

[barker1964]

Autozone and $10.00

[nadams]

went to autozone and they couldnt do anything for me

[elsolo]

Craigslist for Focus cars being parted out, SOHC's are very common for part outs.
Ebay, same thing but with shipping.

Just buy a whole used unit, it will be easier than trying to get just the pulley.
Use the correct puller for removing and reinstalling it, not just a gear or bearing puller.