For Sale: * Used * 1 set of ST170 headlights & 1 set of InPro's

GrndZero · 01-22-2013, 05:53 PM

Your Location:Fayetteville North Carolina US.
Item Description:1 set of ST170 headlights and 1 set of InPro headlights for MK1 NA Focus

ST170s were bought brand new back in 2003. The Passenger side headlight has the broken bracket that a lot of people ran into from shipping. These will most likely be project lights as the passenger side has had the cover removed. I ran into an issue of the covers having lines/cracks inside the plastic. These can be removed by someone with enough time by sanding/polishing. I was going to do this and just don't have the time. Everything works fine as far as lighting goes.
The back covers have a hole drilled in them since I was dabbling in using HID's at one point then took them out when I did not see anything special. A grommet will fit into place of the hole. It was drilled out so wires could be passed through.

InPro's were bought back in May 2010. The passenger side light has a broken post on the inside of the light but I never had an issue with it as far as I can tell. Light produced was unaffected. If you had the European motors to make them go up and down it might be an issue but since most of us over here in NA don't have them I guess it is a nill issue. It can also be glued I am assuming.
I am guessing if someone wanted a project, they could take the black InPro inserts and put them into the ST170's so that they could have real ST170 with black inserts along with the clear blinker assemblies. The ST170 as stated need some care but still good lights.
I got tired of waiting on fixing the ST170's and wanted some again so I now have a brand new set that I just installed today. This is why I am selling both sets. The black of the InPro's are a plus but I wanted to go back to the stock ST170 headlight look to match the ST170 grills on my European setup.

Asking/Offering Price:$220 for ST170 | $250 for InPro's

The pics are as follows.
Pic of all 4 headlights. Passenger cover of ST170's removed. The InPro's are in the back row.

Closer shot of the passenger side headlights.

Closer shot of the driver side.

Shot of the back of the Driver side and showing the hole drilled in the cover of the ST170.

Shot of the back of the passenger side.

Close up of what I was starting to do to the passenger side cover of the ST170

Closer shot of the passenger side InPro. If I get around to cleaning them up, I will take a better picture. (its freaking cold outside)

Picture of the broken tab on the passenger side ST170

A shot of the what was happening to the cover and the reason I took one off to sand and polish.

I am working on getting boxes for these. I have the boxes that were used to deliver my new ST170's for one set. I need to find another box/boxes for the other set.