For sale: cmf orp, oem svt cat, oem svt modified header, oem svt springs

[anarchyamp]

Up for sale I have a like-new cfm orp with maybe 100-200 miles on it before I went turbo. Would like to get $175 for it. You save $50 plus shipping! It is the new design. SOLD!


My oem svt header that I had modified for my old turbo setup. I am now running the topspeed turbo manifold. I know this is a narrow market and I will be hard pressed to find the right person that wants this, but you could also buy it and take it to a welder to turn it back into a stock n/a manifold? I am ashamed to say how much I spent to have this header turned into a turbo header but I'll price it for what they normally go for. $150 (The turbo that is attached to it was sold already)

Here is how the setup looked and sat in the engine bay. Please also note I had to relocate the battery to the trunk.







My stock cat which has about 90-100k miles on it. I am not sure if I even wanna sell it as they seem to be in demand since they are 2k new!! Ridiculous. I also had it taken to a welder and we screwed in a nut to plug the rear o2 hole, and then drilled a hole and welded a new o2 bung on the side to never again have the crushed o2 sensor problem! My solution to fords design flaw. I don't know how much to ask for this sooo make me an offer... SOLD!


Edit: Also have my stock svt springs for sale $100

Edit: 3/22/13- Also have my stock svt halogen headlights with vinyl eyelids applied (not the hid machs unfortunately just the normal ones)

without eyelids


With eyelids


stock brakelights


Turbonetics .63 AR exhaust side from stage 3, 50 trim turbo manufactured in 2006, 5 bolt pattern Subaru downpipe connection but they make adapter plates to fit 4 bolt downpipes, v-band downpipes etc. (barely used) $60


Cobra radar detector (used) Make me an offer


Campbell Hausfeld air pressure fed paint sprayer (or anything sprayer, pesticides etc., bnib) $40


And also have a lot of stuff left over from the turbo build like 2.5" intercooler piping, -8 and -10 an line fittings for oil return hose, -4, -8, and -10 stainless braided hose/line, v band clamps, t-bolt clamps, vibrant weld bung, vibrant oil drain flange for turbo, etc.

I can be reached at 520 289 2828 thanks

[Sponsor]

[boostedsvtf]

do you still have a down pipe for that

[anarchyamp]

Originally Posted by boostedsvtf

do you still have a down pipe for that

Yes, I forgot to mention you will get the downpipe with the turbo header but keep in mind the downpipe is for a v-band turbo, in other words, it is a v band downpipe. Of course, it can be cut off and a different flange welded on if need be.

[vortechzx3]

shipping quote on the header to 00959, i want it!!!!

[anarchyamp]

Originally Posted by vortechzx3

shipping quote on the header to 00959, i want it!!!!

Since I don't know the exact weight or dimesions of the header and downpipe, I cannot give you an accurate quote but I will go to the ups store tomorrow to see how much it will be

[vortechzx3]

Ups will be too much since im from puerto rico its better usps parcel post

[anarchyamp]

Originally Posted by vortechzx3

Ups will be too much since im from puerto rico its better usps parcel post

That's fine, I can do usps instead :)

[Eastwood]

I bet that manifold flows good for turbo manifold
to bad I already have turbo manifold - price is really cheap
bump!

[anarchyamp]

Originally Posted by Eastwood

I bet that manifold flows good for turbo manifold
to bad I already have turbo manifold - price is really cheap
bump!

Hey thanks semi-local guy! haha, yes it did flow really well, it didn't really hit boost till about 4k but when it did, it was nasty lol. I was putting everything to shame on 6-7 psi!

[darkstar]

What turbo was that when the boost hit at 4k? Is it sold yet? Might be interested in a week.