"Official" Hawaii Photo Thread - Page 55

YZ04 · 10-23-2009, 01:01 AM

I can't wait until you figure out if this switch will even work in our cars! So for the rear fogs did you just have to add a + wire from the switch to the fog pins on the tail lamps? I noticed everything is already grounded on the tail lamp circuit, so I assume you just need one extra wire going into the tail lamp?

Kauai Guy · 10-23-2009, 01:22 AM

Yup! All you need to do to wire the rear fog is pin slot 2 on the head lamp plug and run that wire all the way to the rear fog pin on the tail light, which I think was pin 6 on the driver's side.

This is all I could decipher at the moment

2-D · 10-27-2009, 09:47 AM

So, I may be moving out to Oahu, is there an focus people on the north shore?

YZ04 · 10-27-2009, 03:11 PM

Not that I know of. There are some of us on Oahu though. And two on Kauai on FF

Kauai Guy · 10-28-2009, 02:21 AM

Hmm technically there's 4, but were out 1 now. The guy on here got a prelude, and the other 2 really aren't members.

Kauai Guy · 11-01-2009, 01:21 AM

YZ04, what spare parts do you have leftover from your mach projectors?

YZ04 · 11-01-2009, 01:09 AM

I have all the DEPO parts minus housing, bulbs, ballast, and lenses. I have projectors (RHD), turn signal assembly, internal wiring harness, and main bulb assembly for both sides. Are you looking for spare parts for another project?

Kauai Guy · 11-01-2009, 04:26 AM

Yup, I can get the housings with the projectors & internal wiring. So I need the rear dust caps, ballast, bulbs and ignitors. I might just use an HID D2S kit though, since if the ballast ever goes bad its cheap and easy to replace.

Random Select · 11-02-2009, 09:21 PM

hello peoples.

Kauai Guy · 11-03-2009, 12:36 AM

Wow man, you haven't been on in forever!

YZ04 · 11-05-2009, 02:08 AM

^So how is the Euro switch project coming along?

Kauai Guy · 11-05-2009, 07:30 PM

I don't think it would work. You would probably need the junction box to go with it :/

You want a copy of the TIS?

10-23-2009, 01:01 AM	#649
YZ04 Focus Addict Join Date: Apr 2006 Fan#: 33875 Location: A tiny ass rock in the middle of the Pacific, HI What I Drive: A 4 door family saloon, '09 Trek2.1 Posts: 867 FF Reputation: 10 Buy-Sell-Trade Rating: (22)	I can't wait until you figure out if this switch will even work in our cars! So for the rear fogs did you just have to add a + wire from the switch to the fog pins on the tail lamps? I noticed everything is already grounded on the tail lamp circuit, so I assume you just need one extra wire going into the tail lamp? __________________ 2004 Euro-White Saloon

10-23-2009, 01:22 AM	#650
Kauai Guy Faux SVT FTW Join Date: Aug 2008 Fan#: 58297 Location: Hawaii, HI What I Drive: 01 PB SE, 01 CDS ZX3 'SVT' Posts: 2,668 FF Reputation: 15 Buy-Sell-Trade Rating: (12)	Yup! All you need to do to wire the rear fog is pin slot 2 on the head lamp plug and run that wire all the way to the rear fog pin on the tail light, which I think was pin 6 on the driver's side. This is all I could decipher at the moment __________________ Sedan Revolution #150. Wolf in sheep's clothing, there's no better way. Buy my stuff! PM me for info! Aluminum Valve CoverMTX75 Swap Parts*

10-27-2009, 09:47 AM	#651
2-D Fistpumping = 5whp Join Date: Feb 2007 Fan#: 44194 Location: Bradenton FL, FL What I Drive: 2004 Black SE sedan Posts: 2,145 FF Reputation: 4 Buy-Sell-Trade Rating: (3)	So, I may be moving out to Oahu, is there an focus people on the north shore? __________________ Where there is pixelated smoke, there is 2-D gumpcrew #18 Jöelcrüe #biggerthanshethought Sedan Revolution#159 J3_RACING FTMFW!! MECP 1st Class Installer

10-27-2009, 03:11 PM	#652
YZ04 Focus Addict Join Date: Apr 2006 Fan#: 33875 Location: A tiny ass rock in the middle of the Pacific, HI What I Drive: A 4 door family saloon, '09 Trek2.1 Posts: 867 FF Reputation: 10 Buy-Sell-Trade Rating: (22)	Not that I know of. There are some of us on Oahu though. And two on Kauai on FF __________________ 2004 Euro-White Saloon

10-28-2009, 02:21 AM	#653
Kauai Guy Faux SVT FTW Join Date: Aug 2008 Fan#: 58297 Location: Hawaii, HI What I Drive: 01 PB SE, 01 CDS ZX3 'SVT' Posts: 2,668 FF Reputation: 15 Buy-Sell-Trade Rating: (12)	Hmm technically there's 4, but were out 1 now. The guy on here got a prelude, and the other 2 really aren't members. __________________ Sedan Revolution #150. Wolf in sheep's clothing, there's no better way. Buy my stuff! PM me for info! Aluminum Valve CoverMTX75 Swap Parts*

11-01-2009, 01:21 AM	#654
Kauai Guy Faux SVT FTW Join Date: Aug 2008 Fan#: 58297 Location: Hawaii, HI What I Drive: 01 PB SE, 01 CDS ZX3 'SVT' Posts: 2,668 FF Reputation: 15 Buy-Sell-Trade Rating: (12)	YZ04, what spare parts do you have leftover from your mach projectors? __________________ Sedan Revolution #150. Wolf in sheep's clothing, there's no better way. Buy my stuff! PM me for info! Aluminum Valve CoverMTX75 Swap Parts*

11-01-2009, 01:09 AM	#655
YZ04 Focus Addict Join Date: Apr 2006 Fan#: 33875 Location: A tiny ass rock in the middle of the Pacific, HI What I Drive: A 4 door family saloon, '09 Trek2.1 Posts: 867 FF Reputation: 10 Buy-Sell-Trade Rating: (22)	I have all the DEPO parts minus housing, bulbs, ballast, and lenses. I have projectors (RHD), turn signal assembly, internal wiring harness, and main bulb assembly for both sides. Are you looking for spare parts for another project? __________________ 2004 Euro-White Saloon

11-01-2009, 04:26 AM	#656
Kauai Guy Faux SVT FTW Join Date: Aug 2008 Fan#: 58297 Location: Hawaii, HI What I Drive: 01 PB SE, 01 CDS ZX3 'SVT' Posts: 2,668 FF Reputation: 15 Buy-Sell-Trade Rating: (12)	Yup, I can get the housings with the projectors & internal wiring. So I need the rear dust caps, ballast, bulbs and ignitors. I might just use an HID D2S kit though, since if the ballast ever goes bad its cheap and easy to replace. __________________ Sedan Revolution #150. Wolf in sheep's clothing, there's no better way. Buy my stuff! PM me for info! Aluminum Valve CoverMTX75 Swap Parts*

11-02-2009, 09:21 PM	#657
Random Select Focus Enthusiast Join Date: Sep 2007 Fan#: 50173 Location: HAWAII What I Drive: A Focus Posts: 195 FF Reputation: 1 Buy-Sell-Trade Rating: (0)	hello peoples.

11-03-2009, 12:36 AM	#658
Kauai Guy Faux SVT FTW Join Date: Aug 2008 Fan#: 58297 Location: Hawaii, HI What I Drive: 01 PB SE, 01 CDS ZX3 'SVT' Posts: 2,668 FF Reputation: 15 Buy-Sell-Trade Rating: (12)	Wow man, you haven't been on in forever! __________________ Sedan Revolution #150. Wolf in sheep's clothing, there's no better way. Buy my stuff! PM me for info! Aluminum Valve CoverMTX75 Swap Parts*

11-05-2009, 02:08 AM	#659
YZ04 Focus Addict Join Date: Apr 2006 Fan#: 33875 Location: A tiny ass rock in the middle of the Pacific, HI What I Drive: A 4 door family saloon, '09 Trek2.1 Posts: 867 FF Reputation: 10 Buy-Sell-Trade Rating: (22)	^So how is the Euro switch project coming along? __________________ 2004 Euro-White Saloon

11-05-2009, 07:30 PM	#660
Kauai Guy Faux SVT FTW Join Date: Aug 2008 Fan#: 58297 Location: Hawaii, HI What I Drive: 01 PB SE, 01 CDS ZX3 'SVT' Posts: 2,668 FF Reputation: 15 Buy-Sell-Trade Rating: (12)	I don't think it would work. You would probably need the junction box to go with it :/ You want a copy of the TIS? __________________ Sedan Revolution #150. Wolf in sheep's clothing, there's no better way. Buy my stuff! PM me for info! Aluminum Valve CoverMTX75 Swap Parts*

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode