Logging EGT made easy

[NJSVTGUY]

Converts K type signal to 0-5 for easy logging.

http://www.3rdbrakeflasher.com/index...roducts_id=185

[Sponsor]

[iminhell]

FWIW, there are ways to log EGT from the factory O2 sensor ...

[1turbofocus]

iminhell is correct and there very close , your much better off using A/F and knock for tuning tho , the Zetec / SVT engines tend to run very high EGT

Tom

[NJSVTGUY]

Originally Posted by 1turbofocus

iminhell is correct and there very close , your much better off using A/F and knock for tuning tho , the Zetec / SVT engines tend to run very high EGT

Tom

Agree wasn't suggesting that, it's just another data point to analyze.
Been taking advantage of the warm weather and tuning all weekend.
Finishing the GN and will start Xios SVT next.
With a PTE 6265S getting 19 psi in less than 1 sec. IAT increased only 5 degrees. It's like a punch to the back!